pH, ORP, and Titration, Combination Electrodes
Research Products International Corp Replacement pH Electrode for Checker 1 pH Tester
The spare pH electrode for the Checker pH meter. Replacing the pH electrode is both quick and easy. Simply unscrew the old probe to be replaced and screw on the new one.
Cole-Parmer Oakton Ion Selective Electrode (ISE), Single-Junction, Epoxy; Chloride
A wide variety of ion selective electrodes are availabe to suit a wide array of applications. Select from four electrode types: membrane, solid-state, gas sensing, and glass bulb; typical response time is 20 to 30 seconds. Epoxy-body ISEs are either single- or double-junction, and the glass-body type is double junction.
Cole-Parmer pH electrode, inline/submersion with flat surface, 30K thermistor, 3/4" NPT threads
Water analysis accessories for Cole-Parmer meters. Many of these items are compatible with other brands of meter.
Cole-Parmer Removable High pH Double-Junction pH Electrode
These electrodes are ideal for applications involving high-sodium concentrations. Double-junction reference protects against contamination from heavy metals, organics, and sulfides. Use for measurements from 0 to 14 pH. Electrodes withstand temperatures from 23 to 230ºF (-5 to 110ºC).
McMaster-Carr Master lock 7 Padlock with 9/16" Vertical Shackle Clearance
Laminated Steel Body Padlock. Choose these locks if you need locks that each open with a different key. All locks have random key numbers.
Cole-Parmer Oakton ORP Electrode, Single-Junction, Submersible; 12 x 130 mm
ORP electrodes measure oxidation/reduction levels in plating baths, waste water monitoring, and more. Use platinum-band electrodes for general-purpose applications from 23 to 212>F (-5 to 100>C). Use gold-disc electrodes for solutions containing cyanide from 23 to 230>F (-5 to 110>C).
Cole-Parmer pH Probe, Refillable, High-temp, pH with high Na+
Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors.
Cole-Parmer In-Line pH Probe, SJ/PVDF/100Ohm RTD/10'; Tinned/BNC
In-line electrodes operate from 32 to 212°F (0 to 100°C) and have a chemical-resistant PVDF housing with a 1/2'' NPT(M) thread. Housing measures 4'' x 15/16'' diameter. Electrode extends 1'' beyond housing. Maximum pressure 100 psi. Measure pH from 0 to 13.
eMolecules Ambeed / (R)-3-Amino-3-(4-chlorophenyl)propanoic acid / 250mg / 758385605 / A431271 / / 131690-61-4 / MFCD03840387 / 199.630 / C9H10ClNO2
Ambeed / (R)-3-Amino-3-(4-chlorophenyl)propanoic acid / 250mg / 758385605 / A431271 / / 131690-61-4 / MFCD03840387 / 199.630 / C9H10ClNO2
Bellco Glass, Inc. EASYFERM+ K8 pH Probe,12x120mm Hamilton
Dissolved oxygen and PH electrodes are the eyes and ears for many biotechnology processes. High quality sensors are required for critical measurement and Hamilton sensors are some of the fi in the world. Bellco offers Hamilton gel-filled PH and stainless steel polarographic dissolved oxygen sensors with the standard 4 pin T82 K8 and vp style connectors in 120 to 425 mm lengths.
Grainger ORP Electrode Epoxy BNC Extended Tip
The Grainger Approved ORP Electrode is an oxidation reduction potential electrode used to measure ORP in water. It has a polypropylene body, platinum sensor, BNC connector, and 3/4" NPT threads. The electrode has a measuring range of ±2000 mV with ±15 mV accuracy. It is compatible with controllers and monitors that accept BNC connections and is rated for use in temperatures up to 80°C. The electrode requires calibration and storage solution for proper maintenance. Overall, this is an industrial-grade ORP electrode for water quality monitoring and control applications.
Hach Company Sension+ 5010T laboratory combination pH electrode for general applications
Sension+ 5010T is a low maintenance combination pH electrode with a polycarbonate body, non-refillable gel-electrolyte reference and built-in temperature sensor. The 5010T has a fixed 1 meter cable with BNC connector (pH) and banana (temperature) connectors. It is intended for use with Hach Sension+ Laboratory pH meters. The 5010T has a ceramic pin junction and is ideal for pH measurements in general aqueous applications.
Cole-Parmer All-in-One pH/ATC Probe, Sealed/SJ/Epoxy; Mettler
"All-in-One" electrodes offer versatility and customization. These electrodes combine the pH reference, pH half-cell, and temperature sensor in one 12mm-diameter electrode body. The seven designs allow you to select between low-maintenance, sealed electrodes or clog-resistant refillable electrodes. Tuff-Tip electrodes feature a semi-domed tip which protects the pH bulb and ensures a quick response in harsh and dirty samples. PBR-style electrodes provide predictable, reliable, and quick responsesno matter what the sample temperature. This design virtually eliminates drift, accuracy problems, and premature performance losses due to temperature. All electrodes include 3-ft cable and BNC connector for pH, except where noted. Mettler-Toledo compatible electrodes arrive with the proper 30K temperature compensator and cinch connector for connecting to your meter.
Oakton by Cole-Parmer In-Line pH Probe, DJ/PVDF/100Ohm RTD/10'; Tinned/BNC
In-line electrodes operate from 32 to 212°F (0 to 100°C) and have a chemical-resistant PVDF housing with a 1/2'' NPT(M) thread. Housing measures 4'' x 15/16'' diameter. Electrode extends 1'' beyond housing. Maximum pressure 100 psi. Measure pH from 0 to 13.
Waters Corp Swivel, 2465 Salt Bridge Reference Electrode
Swivel, 2465 Salt Bridge Reference Electrode